Pack content
Description
The Hager Witty Premium XEV100 wallbox can be installed on the wall of your garage or in the parking lot of your company.
The Type 2 lockable side socket will ensure a safe recharging of your electric car in mode 3.
The Hager Witty Premium wallbox XEV100 is a three-phase charging station - its maximum power is 22kW. It is powered by three phases. The charging intensity is adjustable between 6A and 32A, via a potentiometer. It can thus adapt to the available power of your house. Its T2 lockable front plug will ensure a secure recharge of your electric car in mode 3.
Its charging power is adjustable between 4.2kW and 22kW thanks to a potentiometer inside the station. It can be connected in three-phase and thus adapt to all electrical installations. Its adjustable power will allow you to adapt the power according to the available power of the installation.
The charging station is also compatible with an automatic load shedding system via the TIC (remote customer information), as well as with a delayed start system or time switch. It can therefore adapt its charging power according to your installation.
The charging station works in Plug & Play mode. In Plug & Play, as soon as you connect the cable to your vehicle and to the charging station, the charging starts automatically. The RFiD mode is not available on Hager charging stations.
The charging station can be connected in three phases and the charging power can be capped between 6A and 32A. Recharging is done in mode 3 via a type 2 charging cable (Hager side). Maximum power in three-phase 22kW
Dynamic load management solution XEV305
The XEV305 from Hager is a telecommunication module.
The recharge control module allows the charging station to adapt in real time the recharge of your vehicle within the limits of your electrical installation, in order to avoid that this one disconnects because of overvoltage. The TIC Simulator therefore ensures that you always recharge your vehicle at the maximum power available without ever tripping the electrical panel. It is a safety element that is highly recommended when purchasing a charging station
It is compatible with all the charging stations of the Hager brand.
Installation Single phase
Installation three phase
Button to start charging (if the charging station is configured for a delayed start)
The Carplug team has successfully tested the Hager Witty Premium XEV100 charging station. Connecting the power supply is easy thanks to the 10mm² charging station block with its lever mechanism. No need for a screwdriver to connect the cables.
The wallbox lights up quickly, and is ready to charge immediately.
Conclusion : Very positive. Ideal charging station for an outdoor installation. Very resistant to rains and shocks.
Carplug offers a wide range of wallboxes to private individuals within this range. The charging stations proposed in this section are models perfectly adapted to a domestic use. You will find products with different capacities, able to support and distribute several powers: 7kw wallbox and 22kw wallbox mainly. For a private, domestic use, each wallbox for electric car is fully secured. Check the power supported by your vehicle and the capacity of your meter in order to select the single or three-phase wallbox that suits you. A three-phase wallbox will be able to handle more voltage and deliver more power. Depending on your electrical consumption and your home, a single-phase wallbox may be sufficient for your needs or a three-phase model may be more suitable. Sockets and protection solutions to avoid the dangers of overloading a home are also available. Find all the characteristics in the product sheets. If you have any doubts, Carplug professionals are at your disposal to advise you and guide you among these wallboxes towards the model that will perfectly meet your expectations.
Back to the Home
Data sheet
Brand's reference
|
|
Brand | HAGER |
Reference | HAG-XEV100 |
Detailed title | HAGER - Station Witty - XEV100 - 3,0 - 22 kW Shutter |
Compatibility
|
|
Vehicle compatibility | Compatible with all electric cars |
Compatibility 1 PHASE 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Citoën e-Jumpy, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot e-Partner,Renault Twizy, Skoda Citigo e iV, Volkswagen e-Up, Bolloré Bluesummer |
Compatibility 1 PHASE 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi R8 e-tron, BMW iX3, Citoën ë-C4, Fiat 500e, Hyundai Ioniq, Hyundai Kona, Honda-e, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, Lexus UX 300e, Mazda MX-30, Mercedes e-Vito, Mercedes e-Sprinter, Nissan Leaf 2018, Nissan E-NV200, Opel Ampera , Opel Mokka-e, Peugeot e-2008, Renault Master Z.E, Renault Kangoo Z.E, Smart ForFour EQ, Skoda Citigo e iV, Volkswagen e-Golf, Volkswagen I.D 3 |
Compatibility 3 PHASES 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 16A: BMW I3 94Ah, BMW I3 120Ah, Citroën ë-C4, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, DS DS3 Crossback e-Tense, Fiat 500e, Ford Mustang Mach-E, Mercedes EQA, Mercedes EQB, Mercedes EQC, Mercedes EQS, Mini Cooper SE, Opel Corsa-e, Skoda Enyaq, Polestar 2, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen ID.3, Volkswagen ID.4, Volvo XC40 |
Compatibility 3 PHASES 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Porsche Taycan, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X |
Physical specifications
|
|
Color | -30 ° C to + 50 ° C |
Dimensions | L34,6 x H48 x cm P23,3 |
Weight | 15.8 Kg |
Material | Metal clad of a flexible material |
Charge socket | Type 2S |
Connectors | 1 |
Attached cable | No |
Shutter | Yes |
Electrical specifications
|
|
Charge power | 22 kW, 7.4 kW, 3 to 22 kW - Adjustable, 11 kW |
Voltage | 230V to 400V - Adjustable |
Charge current | Configurable 6, 10, 13, 16, 20, 25 or 32A |
Mode of loading | mode 3 |
Leakage current detection | No |
Energy meter | No |
Power supply | Three phase |
Communication & Access
|
|
Indicator | LED Headband 3 colors for the charge states |
Access | Plug & Play |
Protections and Temperatures
|
|
Protection | IP54 - withstands rain |
Impact resistance | IK10 - excellent impact resistance |
Operating temperature | From -30 ° C to + 50 ° C |
Installation
|
|
Mounting | Wall mounting (kit supplied) or post (optional) |
Installation | wall |
Wiring | 10 mm² - In accordance with the regulations and standards |
Certifications
|
|
Standards and guidelines | CE, IEC 6185, IEC 62196-2 |
ZE ready | Yes |
Guarantee
|
|
Guarantee | 2 years |
autres caractéristiques
|
|
Prime Advenir | borne compatible avec le programme Advenir |
Need assistance to choose your charging station or cable?
Need an advice on our products?
Contact our experts, available from Monday to Friday from 9 AM to 6 PM
+33 3 67 10 41 41
Datas sheets :
Compatible products recommendation
We can help you to choose the best charging station
We have the trust of our customers!
Need help? Contact our technical support.
We are available from Monday to Friday from 9:00 to 18:00