Language
Description
It is ideal for home charging outdoors or indoors. This charging station will allow you to take full advantage of your electric vehicle thanks to a charging system in mode 3 (IEC61851), simple, reliable and fast.
The charging power is adjustable to 7.4kW in single-phase, which allows the terminal to be adapted to the available power of the installation.
The Alfen charging station must be protected against overloads, short circuits and insulation faults thanks to a type A differential to be placed in the electrical panel. Thanks to the DC leakage current detector integrated into the terminal, there is no need to install an expensive type B differential in the electrical panel upstream.
Compatible with all models of electric cars or plug-in hybrids, the home charging station charges your vehicle in complete safety and gives you the assurance of leaving the house every morning with a full battery.
Enjoy the unrivaled comfort offered by an electric charging station at home, thanks to a charge 10x faster than with a conventional socket, with Carplug, the number 1 in charging solutions for electric cars for individuals and professionals.
The Eve S-line solution offers Internet connectivity via Ethernet cable.
This system can connect up to 100 single charging stations or 50 double charging stations on a single site. It provides load balancing to optimize vehicle charging while limiting the impact on the electricity grid.
All Alfen products are designed with grid optimization in mind and can be combined with renewable energy production, energy storage and energy management systems.
ALFEN is a Dutch company, listed on the Amsterdam Stock Exchange, which has been manufacturing charging stations since 2011. The brand has become world-renowned for its charging stations, which are synonymous with robustness, reliability and ease of use.
The Alfen single Eve S-Line terminal complies with European standards and is compatible with all electric vehicles on the market. Its plug is type 2S. Manufacturers generally provide a charging cable with a type 2 tip for the terminal. If this is not the case, you will find type 2 charging cables in the category Charging cables.
Charge up to 10 times faster than on a simple domestic socket.
Adapt the charging power to your installation. The charging power is adjustable up to 7.4 kW using the terminal's downloadable ICU software, available on the Alfen website.
The "automatic recovery" function allows, in the event of a power failure, overheating or a fault in the residual current circuit breaker, to resume charging as soon as the power is restored.
The Alfen Eve ProLine terminal is CE and ISO9001 certified and complies with all European safety directives. The terminal blocks the cable during charging, and only releases it when the current no longer flows through it.
In addition, the terminal is equipped with a DC leakage detector, so there is no need to install an expensive type B residual current circuit breaker upstream. A standard type A differential is sufficient.
A RFID reader is incorporated into the terminal. The RFID card access functionality, then the terminal remains permanently locked, and is only activated if a valid RFID card is passed in front of the reader. To stop charging, the userpass your card over the reader again. New RFID cards can be registered via Alfen's ICU software.
The Alfen Eve S-Line terminals are equipped with a MID-certified energy meter, which complies with European calibration guidelines. This means that you can legally re-invoice the energy indicated by this meter, without the risk of legal problems.
The Alfen terminal, with its IP55 and IK10 protection ratings, is weatherproof and shock-resistant and is suitable for indoor and outdoor use. Its protective cover made of glass fibre reinforced composite material is highly resistant to impacts and acts of vandalism.
The terminals are sold with a wall mounting kit. Various mounting feet are available in the Accessories for Alfen charging stations section.
Data sheet
Brand's reference
|
|
Brand | ALFEN |
Reference | AFN-904460555, AFN-904460505-1800 |
Compatibility
|
|
Vehicle compatibility | Compatible with all electric cars |
Compatibility 1 PHASE 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Citoën e-Jumpy, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot e-Partner,Renault Twizy, Skoda Citigo e iV, Volkswagen e-Up, Bolloré Bluesummer |
Compatibility 1 PHASE 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi R8 e-tron, BMW iX3, Citoën ë-C4, Fiat 500e, Hyundai Ioniq, Hyundai Kona, Honda-e, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, Lexus UX 300e, Mazda MX-30, Mercedes e-Vito, Mercedes e-Sprinter, Nissan Leaf 2018, Nissan E-NV200, Opel Ampera , Opel Mokka-e, Peugeot e-2008, Renault Master Z.E, Renault Kangoo Z.E, Smart ForFour EQ, Skoda Citigo e iV, Volkswagen e-Golf, Volkswagen I.D 3 |
Compatibility 3 PHASES 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 16A: BMW I3 94Ah, BMW I3 120Ah, Citroën ë-C4, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, DS DS3 Crossback e-Tense, Fiat 500e, Ford Mustang Mach-E, Mercedes EQA, Mercedes EQB, Mercedes EQC, Mercedes EQS, Mini Cooper SE, Opel Corsa-e, Skoda Enyaq, Polestar 2, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen ID.3, Volkswagen ID.4, Volvo XC40 |
Compatibility 3 PHASES 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Porsche Taycan, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X |
Physical specifications
|
|
Color | Traffic white (RAL 9016) |
Dimensions | L240 x H370 x P130 mm |
Weight | 4 Kg |
Charge socket | Type 2S |
Connectors | 1 |
Attached cable | No |
Shutter | Yes |
Electrical specifications
|
|
Charge power | 2.3 to 7.4 kW - Adjustable, 7.4 kW |
Voltage | 230 |
Charge current | Configurable between 10A and 32A |
Mode of loading | mode 3 |
Leakage current detection | Yes |
Integrated circuit breaker | Integrated circuit breaker 40A |
Energy meter | integrated and certified KWh Meter MID |
Power supply | Single phase |
Communication & Access
|
|
Indicator | LEDs |
Communication module | Ethernet RJ45 |
Communication protocol | OCCP |
Access | RFID card, Plug & Play |
Protections and Temperatures
|
|
Protection | IP55 - withstands rain |
Impact resistance | IK10 - excellent impact resistance |
Operating temperature | -25 ° C to + 40 ° C, humidity 95% max |
Installation
|
|
Mounting | Wall mounting (kit supplied) or post (optional) |
Installation | wall, On stand |
Wiring | 10 mm² - In accordance with the regulations and standards |
Certifications
|
|
Standards and guidelines | Guidelines and certifications: CE, The provisions of the low voltage directive 2014/35 / EU, The provisions of the EMC guideline 2014/30 / EU, IEC 61851-1 (2010) - Electric vehicle conductive charging system, General requirements NEN-EN -IEC 61851-1: 2011 |
ZE ready | No |
Guarantee
|
|
Guarantee | 2 years |
Need assistance to choose your charging station or cable?
Need an advice on our products?
Contact our experts, available from Monday to Friday from 9 AM to 6 PM
+33 3 67 10 41 41
Datas sheets :
Compatible products recommendation
We can help you to choose the best charging station
We have the trust of our customers!
Need help? Contact our technical support.
We are available from Monday to Friday from 9:00 to 18:00