EVBOX Charging station BusinessLine - 7.4kW or 22kW - Autostart - one or three phases

220V charging station EVBOX 7.4kW open access for a company parking

Charging station EVBox Business Line Simple B1321-0022 Autostart - 7.4kW (1Ph-32A) - Autostart - grey was specifically designed for businesses. Its front T2S socket with safety shutter will ensure a safe charging of your electric car mode 3.

It will fit on a Parking: business within or outside in wall or on foot.

It is trusted , strong , and has a reputation for never breaking or breaking down. The city of Amsterdam has installed more than 4,000 in 2017, successfully.

The charging station must be fed with 32A-phase , a load power 7.4kW . It is not possible to change the power.

Autostart : you connect your car and charging starts automatically. In case of power failure,the load will automatically restart when the power returns.

Charging station EVBOX BusinessLine is to protect against overloads, short circuits, insulation faults due to a differential type B to be placed in the switchboard . No continuous leakage DC current sensor is integrated in the charging station.

Charging station will allow you to enjoy your EV through a system reload Mode 3 (IEC61851), simple, reliable and fast.

Compatible with all models of electric cars or Plug-in Hybrid , charging station business support your car any security and offers assurance to hit the road every morning with a battery full.

Enjoy the exclusive comfort of a charging station electric charging at home or office, with a reload 10x faster than with a conventional socket, with CarPlug 1 solutions reload for electric cars for individuals and professionals.

Recharge

35 km range Gain per hour of charging.

Key Features

• Plug & amp; Play
• single phase 32A supply
• Plastic robust IK10
• Resists rain IP54

Options

• Charging station stand - 190cm
• Charging station stand to screw - 140cm

Circuit Protection

The following electrical protection are required and are installed on a dedicated line , with cable section 2,5mm² is 20A circuit breaker, and 10mm² if 40A circuit breaker. They were approved by electricians , and respect the current French regulations:

• Type A differential switch 40A 30mA (eg HAGER BDH240F ) - not included
• 40A circuit breaker C curve (eg HAGER MJT740 ) - not included
• Shunt trip 230 / 415V (required for ZE Ready) ( HAGER MZ203 ) - not included

User Interface

• Automatic start: you plug and charging starts automatically
• 3-colors LED Headband indicating the charge status

Back to the Home

Wallbox charging station Installation EVBOX