Hager Electrical Protection Pack for single-phase charging station

Hager Electrical Protection Pack for single-phase charging station

The following electrical protections are mandatory, and must be installed on a dedicated line. They have been validated by electricians and IRVE experts, and comply with the French regulations in force.

Protections to be installed if single-phase connection:

• Differential switch 40A - Type A Hi - 1P + N - 30mA (ex: HAGER BDH240F )
• Circuit breaker 40A C curve (ex: HAGER MJT740 )

HAGER differential 40A switch compatible with all single-phase terminals

The differential switch HAGER BDH240F - Type AH i - 1P + N - 40A - 30mA is essential for any terminal installation.

It will compare the input current with the output current, and cut the circuit if the difference is greater than 30mA. This function protects people against electric shock.

It was selected by a team of specialized electricians to be compatible with all single-phase terminals on our site.

Compatibility

This BDH240F differential switch is compatible with all single-phase terminals on the market which have a load current between 1 and 32A.

It must be coupled to a circuit breaker, and is compatible with all type circuit breakers HAGER MJT .

Installation

It must be installed on a dedicated line specifically for the charging station, after the main differential switch on the electrical panel.

The terminal must have its own dedicated line, with its own circuit breaker and its own differential switch.

It must be associated with a circuit breaker of the type HAGER MJT .

Main features

• Type: A
• Poles: 1P + N
• Rated current: 40A max
• Rated differential current: 30mA

HAGER 40A circuit breaker compatible with all single-phase terminals

The Circuit breaker magneto-thermal HAGER MJT740 - 1P + N - 40A - Curve C is essential for any terminal installation. It has been selected by a team of specialized electricians and will protect the installation against overvoltages and short circuits.

Its C curve is suitable for high intensity devices such as charging stations. Its high breaking capacity , and its quick cut-off closure are a guarantee in terms of safety, reliability and long life .

Compatibility

This circuit breaker will be suitable for a terminal set at 10A or 13A.

It must be coupled to a differential switch (it is compatible with the BDH240F ).

Installation

It must be installed in the electrical panel, on the differential switch dedicated to the charging station. The terminal must have its own dedicated line, with its own circuit breaker and its own differential switch.

This circuit breaker is compatible with the BDH240F .

Main features

• Number of poles: 1P + N (one pole monitored, two poles cut)
• Power supply: 230V
• Cut-off current: 40A
• Breaking capacity: 4.5-6kA

Home page