Language
Pack content
Description
It is ideal for company interior or exterior (IP54) parking or >public car parks. This terminal will allow you to take full advantage of your electric vehicle thanks to a charging system in mode 3 (IEC61851 ), simple, reliable and fast.
The charging power is adjustable from 3.7kW to 22kW in single phase strong> or three-phase, which allows the terminal to be adapted to the available power of the installation.
The Alfen terminal is to be protected against overloads, short circuits, insulation faults thanks to a type A differential to be placed in the electrical panel . Thanks to the DC leakage current detector integrated into the terminal, there is no need to install an expensive type B differential in the upstream electrical panel.
Compatible with all models of electric cars or plug-in hybrids, the charging station for company and public car parks charge your vehicle in complete safety and offers you the assurance of leave the office every evening with a full battery.
Benefit from the unrivaled comfort offered by an electric charging station at the office or in a public parking lot, thanks to recharging 10x faster than with a traditional socket , with Carplug, number 1 in charging solutions for electric cars for individuals and professionals.
The Eve Single Pro-line solution offers Internet connectivity via GPRS modem (SIM) or Ethernet cable, allowing communication with other supervision systems using open protocols. In addition, it can be integrated into energy management systems.
Featuring a 3.5-inch color screen, this solution offers a friendly user interface as well as real-time information on the charging session. Its popular logo upload module provides a unique opportunity to strengthen your brand identity.
Compatible with the Alfen management system or any other payment and supervision system operating in OCPP, this solution allows you to manage invoicing and payments. Replacing the supervision system is simplified with a simple SIM card exchange.
This system can connect up to 100 single charging stations or 50 double charging stations on a single site. It provides load balancing to optimize vehicle charging while limiting the impact on the electricity network.
All Alfen products are designed with network optimization in mind and can be associated with renewable energy production, energy storage and energy management systems.
The charging station can be equipped with two Type E household sockets, each of which can supply up to 16A (3.7 kW). Access to charging is authorized by an RFID card reader or by Plug&Charge, allowing the user to choose which socket to use.
ALFEN is a Dutch company, listed on the Amsterdam stock exchange, which has been manufacturing terminals since 2011. The brand has become globally recognized for its charging stations, which are synonymous with robustness, reliability and ease of use .
The Alfen Eve ProLine terminal complies with European standards and is compatible with all electric vehicles on the market. Its socket is type 2S. Manufacturers generally provide a charging cable with a type 2 tip for the terminal. If this is not the case, you will find type 2 charging cables in the category Charging cables.
Charge up to 10 times faster than on a SIMple domestic socket.
Adapt the charging power to your installation. The charging power is adjustable between 3.7 and 22 kW using the terminal's downloadable ICU software, software available on the Alfen website.
The “automatic recovery” function allows, in the event of a power outage, overheating or tripping of the differential circuit breaker, to resume charging as soon as the electrical current is restored.
The Alfen Eve ProLine terminal is CE and ISO9001 certified and complies with all European safety directives. The terminal blocks the cable during charging, and releases it only when the current is no longer flowing.
In addition, the terminal is equipped with a direct current leak detector, and it therefore becomes unnecessary to install an expensive type B differential circuit breaker upstream. A classic type A differential is sufficient.
The Alfen Eve single Pro Line terminal can be easily integrated into a network, by connecting each terminal via Ethernet cable to a switch. Depending on requirements, each terminal can be configured as master or slave via Alfen's ICU software. The management software in the terminal also makes it possible to set an instantaneous maximum consumption for all the terminals, and thus avoid tripping the circuit breaker when all the terminals are charging.
The Alfen EVE Single Pro Line terminal has a 4G SIM card slot. This connection allows you to use backend software compatible with the OCPP (Open Charge Point Protocol).
An RFID reader is incorporated into the terminal. If you choose the option of access by RFID card or paid access by RFID card or App, then the terminal remains permanently locked, and is only activated if a valid RFID card is passed in front of the reader. To stop charging, the user must swipe their card again in front of the reader. Registration of new RFID cards can be done via the Alfen ICU software.
The Alfen Eve Single Pro Line terminals are equipped with a MID certified energy meter, complying with European calibration directives. Thus, you can legally re-bill the energy indicated by this meter, without risk of legal problems.
The Alfen bollard, with its IP55 and IK10 protection indices, is resistant to bad weather and shocks and is suitable for indoor or outdoor use. Its protective cover made of composite material reinforced with glass fibers is very resistant to impacts and acts of vandalism.
The multi-colored LED screen of the Alfen Eve Single Pro Line charging station provides you with optimal information on the charging status, as well as the total consumption of your vehicle at the end of charging. Your company logo can be displayed on the screen (paid option). To do this, simply contact our customer service. p>
The terminals are sold with a wall mounting kit. Different mounting feet are available in the section. Accessories for Alfen terminals.
Data sheet
Brand's reference
|
|
Brand | ALFEN |
Reference | AFN-904460025-8720161268614 |
Compatibility
|
|
Vehicle compatibility | Compatible with all electric cars |
Compatibility 1 PHASE 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Citoën e-Jumpy, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot e-Partner,Renault Twizy, Skoda Citigo e iV, Volkswagen e-Up, Bolloré Bluesummer |
Compatibility 1 PHASE 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi R8 e-tron, BMW iX3, Citoën ë-C4, Fiat 500e, Hyundai Ioniq, Hyundai Kona, Honda-e, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, Lexus UX 300e, Mazda MX-30, Mercedes e-Vito, Mercedes e-Sprinter, Nissan Leaf 2018, Nissan E-NV200, Opel Ampera , Opel Mokka-e, Peugeot e-2008, Renault Master Z.E, Renault Kangoo Z.E, Smart ForFour EQ, Skoda Citigo e iV, Volkswagen e-Golf, Volkswagen I.D 3 |
Compatibility 3 PHASES 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 16A: BMW I3 94Ah, BMW I3 120Ah, Citroën ë-C4, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, DS DS3 Crossback e-Tense, Fiat 500e, Ford Mustang Mach-E, Mercedes EQA, Mercedes EQB, Mercedes EQC, Mercedes EQS, Mini Cooper SE, Opel Corsa-e, Skoda Enyaq, Polestar 2, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen ID.3, Volkswagen ID.4, Volvo XC40 |
Compatibility 3 PHASES 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Porsche Taycan, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X |
Physical specifications
|
|
Color | Traffic white (RAL 9016) |
Dimensions | L240 x H370 x P130 mm |
Weight | 4 Kg |
Charge socket | Type 2S |
Connectors | 1 |
Attached cable | No |
Shutter | Yes |
Electrical specifications
|
|
Charge power | From 2.3 to 22 kW - Adjustable |
Voltage | 230V to 400V - Adjustable |
Charge current | Configurable between 10A and 32A |
Mode of loading | mode 3 |
Leakage current detection | Yes |
Integrated circuit breaker | Integrated circuit breaker 40A |
Energy meter | integrated and certified KWh Meter MID |
Power supply | Three phase |
Communication & Access
|
|
Indicator | LED Headband three color LCD |
Communication module | Ethernet RJ45, Wifi, 4G |
Communication protocol | OCCP |
Access | Paying, RFID card, Plug & Play |
Protections and Temperatures
|
|
Protection | IP55 - withstands rain |
Impact resistance | IK10 - excellent impact resistance |
Operating temperature | -25 ° C to + 40 ° C, humidity 95% max |
Installation
|
|
Mounting | Wall mounting (kit supplied) or post (optional) |
Installation | wall, On stand |
Wiring | 10 mm² - In accordance with the regulations and standards |
Certifications
|
|
Standards and guidelines | Guidelines and certifications: CE, The provisions of the low voltage directive 2014/35 / EU, The provisions of the EMC guideline 2014/30 / EU, IEC 61851-1 (2010) - Electric vehicle conductive charging system, General requirements NEN-EN -IEC 61851-1: 2011 |
ZE ready | No |
Guarantee
|
|
Guarantee | 2 years |
autres caractéristiques
|
|
Package content | 1 charging station + 1 wall mounting kit + 1 + 2 user guide RFID cards |
Need assistance to choose your charging station or cable?
Need an advice on our products?
Contact our experts, available from Monday to Friday from 9 AM to 6 PM
+33 3 67 10 41 41
Datas sheets :
Compatible products recommendation
We can help you to choose the best charging station
We have the trust of our customers!
Need help? Contact our technical support.
We are available from Monday to Friday from 9:00 to 18:00