HAGER Witty 7.4kW or 22kW charging station - with Type E socket options

file not finalized

The new French charging station HAGER Witty ideal for home or business, adjustable from 2.3 to 22kW

The Hager Witty kiosk will find its place in your garage or in your business car park. The Hager Witty charging station is designed to be installed indoors or outdoors . You will have the choice of fixing it to the wall or on a stand . Its side lockable T2S socket will ensure safe charging of your electric car in mode 3.

The cable support Hager XEVA100 can be fixed on the charging station or on the wall.

Its charging power is adjustable between 2.3kW and 7.4kW single-phase or between 9kw and 22kW three-phase by programming. the three-phase version can be connected in single-phase or three-phase and thus adapt to all electrical installations. The single-phase version accepts only single-phase power. Its adjustable power will allow you to cap the charging power of your charging station according to the power available in your electrical installation.

With the TIC/CHP ENT electronic card module (XEVA200), the charging station can also integrate an automatic load shedding system via the TIC (customer remote information), as well as a delayed start system or time switch. It can adapt the charging power according to your installation and the most advantageous kWh rates. These options are only compatible with a Linky meter by wired connection (Historical ICT or standard ICT) or by radio ICT connection with the TRPS120 radio transmitter. This is to be connected to your Linky meter. (the electronic card is not provided).

In single-phase and three-phase versions, the Witty charging station integrates 6 mA DC protection on the electronic board, which replaces the very expensive type B protection function.

You can authorize the load by key or choose free access.

This charging station offers the possibility of having a Type E socket (domestic socket) in addition to the type 2S socket. This is a reinforced Witty plug delivering 3.2 kW .

The HAGER Witty charging station is compatible with all vehicles.

Recharge Gain

• 3kW = 13.6km of range per hour of charging.
• 7.4kW = 35km of range per hour of charging.
• 22kW = 100km of range per hour of charging.

Presentation of the versions of the Witty charging station :

Protections included:

• XEV1K07T2TPFR IP55 charging station 1x7kW T2S + TIC socket + protections with key
• XEV1K07T2TETPFR IP55 charging station 1x7kW T2S socket + domestic socket + TIC + protections with key

Protections to provide:

• XEV1K22T2TET IP55 charging station 1x22kW 3P T2S socket + domestic socket + TIC with key
• XEV1K22T2T IP55 charging station 1x22kW 3P T2 + TIC socket with key

Main features

• Charging power adjustable between 2.3kW and 7kW for the single-phase version in mode 3
  
• Charging power adjustable between 9kW and 22kW for the three-phase version in mode 3
• Fixed charging power at 2.3 kW in mode 2
• Off-peak / full-hour load management
• Plastic shell with impact resistance IK10
• IP55 rain resistant
• ZE Ready 1.4 certified
• E.V Ready 1.4 certified
• T2S type socket or available with T2S + Type E socket (domestic socket)

Electrical protections required

Single-phase version - Protection delivered with the charging station

The following electrical protections are mandatory, and must be installed on a dedicated line , with a 10mm² single-strand or 16mm² multi-strand cable section only with copper cables. Do not connect with copper-alu cables. A circuit breaker and a differential at 40A are also necessary. They have been validated by electricians and IRVE experts, and comply with the French regulations in force:

• Differential switch 40A Type A 30mA (ex: HAGER BDH240F )
  
• 40A circuit breaker C curve (ex: HAGER MJT740 )
• 230 / 415V current shunt release (recommended by HAGER) ( HAGER MZ203 )

Three-phase version - Protection not supplied with the charging station

The following electrical protections are mandatory, and must be installed on a dedicated line , with a 10mm² single-strand or 16mm² multi-strand cable section only with copper cables. Do not connect with copper-alu cables. A differential and a 40A circuit breaker are also required. They have been validated by electricians and IRVE experts, and comply with the French regulations in force:

• Differential switch 40A Type A / HI 30mA - (ex: ​​HAGER BDH940F ) - included in the pack
• 4x40A circuit breaker C curve (ex: ​​ ​​HAGER NFT840 ) - included in the pack
• 230 / 415V shunt release (recommended by HAGER) ( HAGER MZ203 ) - included in the pack

Supplement for the optimization of protection recommended by HAGER

The shunt release current HAGER MZ203 - 230/415 VAC, also called shunt coil, is an additional safety , not obligatory, which completes the obligatory duo of differential switch + circuit breaker, in order to ensure complete electrical protection of your charging station.

The current shunt release is recommended by HAGER in order to optimize the safety of your electrical installation.

The MZ203 coil is placed just before the circuit breaker of the charging station and both form a block together. The MZ203 coil is directly connected to the HAGER charging station on ports X1.2 and X0.1 of the charging station.

HAGER fixing foot:

Fixation foot for only one charging station XEV418

Want to know more about wallboxes?

Carplug provides individuals with a wide choice of wallbox within this range. The charging stations offered in this section are models perfectly suited for domestic use. You will find products with different capacities, able to support and distribute several powers: wallbox 7kw and wallbox 22kw mostly. For private, domestic use, each wallbox for electric car is completely secure. Check the power supported by your vehicle and the capacity of your meter in order to select the single-phase wallbox or three-phase that suits you. A three-phase wallbox will be able to withstand more voltage and deliver more power. Depending on your electricity consumption and your home, a single-phase wallbox charging station may be sufficient for your needs or a three-phase model will be more suitable. Outlets and protection solutions to avoid the dangers of overloading a home are also available. Find all the characteristics in the product sheets. If in doubt, Carplug professionals are at your disposal to advise you and guide you among these wallboxes to the model that will perfectly meet your expectations.

Back to the homePage