Language
Description
The Wallbox CARPLUG by Circontrol ehome - 1.4kW to 7.4kW adjustable is connected in single phase 230V VAC +/- 10%.
The power of the terminal is adjustable using a potentiometer ranging from 6A to 32A.
The Plug'n'Charge charging mode allows you to start charging simply by plugging the type 2 plug of the terminal into your vehicle. There are no identification constraints.
The Led bar present on the front of the terminal, allows you to know the status of the terminal (eg: broken down, functional etc ... ) but the state of charge , blinking blue led means charging in progress, steady blue led means charging is complete.
The casing of the bollard is made of ABS plastic, which gives it robustness and UV resistance . This terminal can therefore be installed indoors as well as outdoors. The eHome charging station from CARPLUG is not afraid of extreme weather conditions.
Its design is thought to allow you to wrap the cable around the terminal when you are not using it. This is to avoid damaging the type 2 charging socket .
You can also choose an optional cable support, more practical with its automatic hanging system.
It offers a 5m attached cable with a type 2 plug to ensure safe charging of your electric vehicle in mode 3 .
Thanks to its compact design easily removable , installation can easily be done in less than an hour by a professional.
It has two entries for the power cable, one from the back of the terminal, for installation without visible power cable and another entry from below the terminal.
Thanks to the internal potentiometer, you can easily adjust the maximum power of your eHome wallbox . Below is the table showing you the different positions available:
Positions | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
Amperage | Not used | 6 A | 10 A | 13 A | 16 A | 20 A | 32 A | Not used | Not used | Not used |
Electrical protections are mandatory in France, and must be installed on a dedicated line.
They have been validated in compliance with the IRVE decree January 2017, the French regulations in force.
Here are the protections to install:
The intelligent sensor CIRCONTROL BeON is the ideal accessory to accompany your CIRCONTROL eHome charging station.
This one This optimizes the time de recharges when the power while avoiding power cuts.
The CIRCONTROL eHome terminal will therefore charge your electric vehicle taking into account your household appliances and other electrical devices.
Please choose the CIRCONTROL BeON according to your electrical installation. This is chosen in relation to the total power of your electrical panel .
Carplug provides individuals with a wide choice of wallbox within this range. The charging stations offered in this section are models perfectly suited for domestic use. You will find products with different capacities, which can support and distribute several powers: wallbox 7kw and wallbox 22kw mostly. For private, domestic use, each wallbox for electric car is completely secure. Check the power supported by your vehicle and the capacity of your meter in order to select the single-phase wallbox or three-phase that suits you. A three-phase wallbox will be able to withstand more voltage and deliver more power. Depending on your electricity consumption and your home, a single-phase wallbox terminal may be sufficient for your needs or a three-phase model will be more suitable. Outlets and protection solutions to avoid the dangers of overloading a home are also available. Find all the characteristics in the product sheets. If any doubt persists, Carplug professionals are at your disposal to advise you and guide you among these wallboxes to the model that will perfectly meet your expectations.
Back to the Home page
Data sheet
Brand's reference
|
|
Brand | CIRCONTROL |
Reference | CIR-eHome |
Compatibility
|
|
Vehicle compatibility | Compatible with all electric cars |
Compatibility 1 PHASE 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Citoën e-Jumpy, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot e-Partner,Renault Twizy, Skoda Citigo e iV, Volkswagen e-Up, Bolloré Bluesummer |
Compatibility 1 PHASE 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi R8 e-tron, BMW iX3, Citoën ë-C4, Fiat 500e, Hyundai Ioniq, Hyundai Kona, Honda-e, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, Lexus UX 300e, Mazda MX-30, Mercedes e-Vito, Mercedes e-Sprinter, Nissan Leaf 2018, Nissan E-NV200, Opel Ampera , Opel Mokka-e, Peugeot e-2008, Renault Master Z.E, Renault Kangoo Z.E, Smart ForFour EQ, Skoda Citigo e iV, Volkswagen e-Golf, Volkswagen I.D 3 |
Compatibility 3 PHASES 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 16A: BMW I3 94Ah, BMW I3 120Ah, Citroën ë-C4, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, DS DS3 Crossback e-Tense, Fiat 500e, Ford Mustang Mach-E, Mercedes EQA, Mercedes EQB, Mercedes EQC, Mercedes EQS, Mini Cooper SE, Opel Corsa-e, Skoda Enyaq, Polestar 2, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen ID.3, Volkswagen ID.4, Volvo XC40 |
Compatibility 3 PHASES 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Porsche Taycan, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X |
Physical specifications
|
|
Color | White black |
Dimensions | L180 x H315 x P115 mm |
Weight | 4 Kg |
Material | Plastic |
Charge socket | Type 2 |
Connectors | 1 |
Attached cable | Attached cable 5m Type 2 |
Shutter | No |
Electrical specifications
|
|
Charge power | 3.7 kW, 7.4 kW, 2.3 to 7.4 kW - Adjustable |
Voltage | 230 |
Charge current | 32A |
Mode of loading | mode 3 |
Integrated circuit breaker | No, No |
Energy meter | No |
Max power | 7,4kW |
Power supply | Single phase |
Communication & Access
|
|
Indicator | LEDs |
Communication protocol | No, autostart |
Access | Plug & Play |
Protections and Temperatures
|
|
Protection | IP54 - withstands rain |
Impact resistance | IK10 - excellent impact resistance |
Operating temperature | -5 °C à +45 ºC |
Installation
|
|
Mounting | Wall (supplied kit) |
Installation | wall |
Wiring | 10 mm² - In accordance with the regulations and standards |
Certifications
|
|
Standards and guidelines | Certifié CE |
ZE ready | Yes |
Guarantee
|
|
Guarantee | 2 years |
autres caractéristiques
|
|
Package content | 1 charging station + 1 wall mounting kit + 1 user guide |
Need assistance to choose your charging station or cable?
Need an advice on our products?
Contact our experts, available from Monday to Friday from 9 AM to 6 PM
+33 3 67 10 41 41
Datas sheets :
Compatible products recommendation
We can help you to choose the best charging station
We have the trust of our customers!
Need help? Contact our technical support.
We are available from Monday to Friday from 9:00 to 18:00