- Pack
- New
Payment
Within 14 days
24-48h
Main features
Description
The Hager Witty One 7.4kW charging station is the ideal recharging solution for single-family homes. Designed and manufactured in France, it combines Hager's legendary reliability with a modern interface via the Hager Mood application. This single-phase charging station adapts perfectly to your domestic electrical installation for safe, intelligent and optimized recharging.
| Features | Details |
|---|---|
| Charging power | Up to 7.4kW (Single-phase 32A) |
| Rated voltage | 230V AC |
| Connector | Type 2S plug (with safety shutters) |
| Connectivity | Bluetooth (Hager Charge application) |
| Protection | IP55 (water/dust) and IK10 (shock) |
| Dimensions | 453 x 295 x 165 mm |
| Installation | Wall-mounted or free-standing (optional) |
In compliance with French regulations, the Witty One incorporates a Type 2S plug with shutters, guaranteeing total safety in the home. This is the essential standard for domestic installations in France.
Thanks to time programming via the Häger Charge app, you can charge your vehicle exclusively during off-peak hours. With single-phase 7.4kW, you'll recover around 40 to 50 km of range per hour of charging.
For IRVE installers, the Witty One charging station offers generous wiring space and intuitive commissioning. It is the ideal replacement for older generations of Häger charging stations.
The Häger Witty One charging station makes saving money simple. With Tele-Customer Information (TIC), your Witty One charging station becomes an optimization pro. It communicates directly with your meter to recharge at the right time, at the best price.
Old meter? No problem. The TIC transmits the essentials (off-peak/peak hours) for an already smarter recharging.
Linky meter? This is the next level. Real-time power, alerts, ultra-precise data... Your consumption is under control, 24 hours a day.
Zero work, 100% efficiency: the connection between your meter and Witty One is immediate. Just plug in, configure and go.
The real plus? Your charging scenarios adapt to your subscription (off-peak, TEMPO, EJP). Your IRVE installer sets everything up so that your car charges itself, at the cheapest times. The result? A full tank every morning, effortlessly and at no extra cost.
Intelligent charging is now possible with the Häger Witty One charging station.
Single-phase version - Protection not supplied with bollard
The following electrical protections are mandatory, and must be installed on a dedicated line, with a cable cross-section of 10mm² single-strand or 16mm² multi-strand, using copper cables only. Do not connect with copper-aluminum cables. A circuit breaker and a 40A differential are also required. They have been validated by electricians and IRVE experts, and comply with current French regulations:
HAGER recommended add-on for optimizing protection
The HAGER MZ203 - 230/415 VAC current release, also known as a current release coil, , is an additional, non-mandatory safety device that complements the mandatory differential switch + circuit breaker duo, to ensure complete electrical protection of your charging station.
HAGER recommends the current release to optimize the safety of your electrical installation.
The MZ203 coil is placed just before the bollard circuit-breaker, and the two form a block. The MZ203 coil is connected directly to the HAGER terminal on ports X1.2 and X0.1 of the terminal.
HAGER cable support :
HAGER witty cable holder for terminal or wall mounting XEVA100
Carplug offers a wide choice of wallboxes in this range. The wallboxes in this section are perfectly suited to domestic use. You'll find products with different capacities, capable of supporting and distributing several power ratings: mainly 7kw and 22kw wallboxes. For private, domestic use, each electric car wallbox is fully protected. Check the power supported by your vehicle and the capacity of your meter to select the single-phase or three-phase wallbox that's right for you. A three-phase wallbox can handle more voltage and deliver more power. Depending on your electricity consumption and the size of your home, a single-phase wallbox may be sufficient for your needs, or a three-phase model may be more suitable. Sockets and protection solutions to avoid the dangers of overloading a home are also available. You'll find all the specifications in the product data sheets. If you still have any doubts, Carplug's professionals will be happy to advise you and guide you through the wallboxes to the model that's just right for you.
Back to home page
The Hager Witty One 7.4kW charging station is the ideal recharging solution for single-family homes. Designed and manufactured in France, it combines Hager's legendary reliability with a modern interface via the Hager Mood application. This single-phase charging station adapts perfectly to your domestic electrical installation for safe, intelligent and optimized recharging.
| Features | Details |
|---|---|
| Charging power | Up to 7.4kW (Single-phase 32A) |
| Rated voltage | 230V AC |
| Connector | Type 2S plug (with safety shutters) |
| Connectivity | Bluetooth (Hager Charge application) |
| Protection | IP55 (water/dust) and IK10 (shock) |
| Dimensions | 453 x 295 x 165 mm |
| Installation | Wall-mounted or free-standing (optional) |
In compliance with French regulations, the Witty One incorporates a Type 2S plug with shutters, guaranteeing total safety in the home. This is the essential standard for domestic installations in France.
Thanks to time programming via the Häger Charge app, you can charge your vehicle exclusively during off-peak hours. With single-phase 7.4kW, you'll recover around 40 to 50 km of range per hour of charging.
For IRVE installers, the Witty One charging station offers generous wiring space and intuitive commissioning. It is the ideal replacement for older generations of Häger charging stations.
The Häger Witty One charging station makes saving money simple. With Tele-Customer Information (TIC), your Witty One charging station becomes an optimization pro. It communicates directly with your meter to recharge at the right time, at the best price.
Old meter? No problem. The TIC transmits the essentials (off-peak/peak hours) for an already smarter recharging.
Linky meter? This is the next level. Real-time power, alerts, ultra-precise data... Your consumption is under control, 24 hours a day.
Zero work, 100% efficiency: the connection between your meter and Witty One is immediate. Just plug in, configure and go.
The real plus? Your charging scenarios adapt to your subscription (off-peak, TEMPO, EJP). Your IRVE installer sets everything up so that your car charges itself, at the cheapest times. The result? A full tank every morning, effortlessly and at no extra cost.
Intelligent charging is now possible with the Häger Witty One charging station.
Single-phase version - Protection not supplied with bollard
The following electrical protections are mandatory, and must be installed on a dedicated line, with a cable cross-section of 10mm² single-strand or 16mm² multi-strand, using copper cables only. Do not connect with copper-aluminum cables. A circuit breaker and a 40A differential are also required. They have been validated by electricians and IRVE experts, and comply with current French regulations:
HAGER recommended add-on for optimizing protection
The HAGER MZ203 - 230/415 VAC current release, also known as a current release coil, , is an additional, non-mandatory safety device that complements the mandatory differential switch + circuit breaker duo, to ensure complete electrical protection of your charging station.
HAGER recommends the current release to optimize the safety of your electrical installation.
The MZ203 coil is placed just before the bollard circuit-breaker, and the two form a block. The MZ203 coil is connected directly to the HAGER terminal on ports X1.2 and X0.1 of the terminal.
HAGER cable support :
HAGER witty cable holder for terminal or wall mounting XEVA100
Carplug offers a wide choice of wallboxes in this range. The wallboxes in this section are perfectly suited to domestic use. You'll find products with different capacities, capable of supporting and distributing several power ratings: mainly 7kw and 22kw wallboxes. For private, domestic use, each electric car wallbox is fully protected. Check the power supported by your vehicle and the capacity of your meter to select the single-phase or three-phase wallbox that's right for you. A three-phase wallbox can handle more voltage and deliver more power. Depending on your electricity consumption and the size of your home, a single-phase wallbox may be sufficient for your needs, or a three-phase model may be more suitable. Sockets and protection solutions to avoid the dangers of overloading a home are also available. You'll find all the specifications in the product data sheets. If you still have any doubts, Carplug's professionals will be happy to advise you and guide you through the wallboxes to the model that's just right for you.
Back to home page
The Hager Witty One 7.4kW charging station is the ideal recharging solution for single-family homes. Designed and manufactured in France, it combines Hager's legendary reliability with a modern interface via the Hager Mood application. This single-phase charging station adapts perfectly to your domestic electrical installation for safe, intelligent and optimized recharging.
| Features | Details |
|---|---|
| Charging power | Up to 7.4kW (Single-phase 32A) |
| Rated voltage | 230V AC |
| Connector | Type 2S plug (with safety shutters) |
| Connectivity | Bluetooth (Hager Charge application) |
| Protection | IP55 (water/dust) and IK10 (shock) |
| Dimensions | 453 x 295 x 165 mm |
| Installation | Wall-mounted or free-standing (optional) |
In compliance with French regulations, the Witty One incorporates a Type 2S plug with shutters, guaranteeing total safety in the home. This is the essential standard for domestic installations in France.
Thanks to time programming via the Häger Charge app, you can charge your vehicle exclusively during off-peak hours. With single-phase 7.4kW, you'll recover around 40 to 50 km of range per hour of charging.
For IRVE installers, the Witty One charging station offers generous wiring space and intuitive commissioning. It is the ideal replacement for older generations of Häger charging stations.
The Häger Witty One charging station makes saving money simple. With Tele-Customer Information (TIC), your Witty One charging station becomes an optimization pro. It communicates directly with your meter to recharge at the right time, at the best price.
Old meter? No problem. The TIC transmits the essentials (off-peak/peak hours) for an already smarter recharging.
Linky meter? This is the next level. Real-time power, alerts, ultra-precise data... Your consumption is under control, 24 hours a day.
Zero work, 100% efficiency: the connection between your meter and Witty One is immediate. Just plug in, configure and go.
The real plus? Your charging scenarios adapt to your subscription (off-peak, TEMPO, EJP). Your IRVE installer sets everything up so that your car charges itself, at the cheapest times. The result? A full tank every morning, effortlessly and at no extra cost.
Intelligent charging is now possible with the Häger Witty One charging station.
Single-phase version - Protection not supplied with bollard
The following electrical protections are mandatory, and must be installed on a dedicated line, with a cable cross-section of 10mm² single-strand or 16mm² multi-strand, using copper cables only. Do not connect with copper-aluminum cables. A circuit breaker and a 40A differential are also required. They have been validated by electricians and IRVE experts, and comply with current French regulations:
HAGER recommended add-on for optimizing protection
The HAGER MZ203 - 230/415 VAC current release, also known as a current release coil, , is an additional, non-mandatory safety device that complements the mandatory differential switch + circuit breaker duo, to ensure complete electrical protection of your charging station.
HAGER recommends the current release to optimize the safety of your electrical installation.
The MZ203 coil is placed just before the bollard circuit-breaker, and the two form a block. The MZ203 coil is connected directly to the HAGER terminal on ports X1.2 and X0.1 of the terminal.
HAGER cable support :
HAGER witty cable holder for terminal or wall mounting XEVA100
Carplug offers a wide choice of wallboxes in this range. The wallboxes in this section are perfectly suited to domestic use. You'll find products with different capacities, capable of supporting and distributing several power ratings: mainly 7kw and 22kw wallboxes. For private, domestic use, each electric car wallbox is fully protected. Check the power supported by your vehicle and the capacity of your meter to select the single-phase or three-phase wallbox that's right for you. A three-phase wallbox can handle more voltage and deliver more power. Depending on your electricity consumption and the size of your home, a single-phase wallbox may be sufficient for your needs, or a three-phase model may be more suitable. Sockets and protection solutions to avoid the dangers of overloading a home are also available. You'll find all the specifications in the product data sheets. If you still have any doubts, Carplug's professionals will be happy to advise you and guide you through the wallboxes to the model that's just right for you.
Back to home page
Data sheet
| Brand | HAGER |
|---|
| Vehicle compatibility | Compatible with all electric cars |
|---|
| Color | Black |
|---|---|
| Dimensions | H370 x W250 x P150 mm |
| Weight | 4 Kg |
| Charge socket | Type 2S |
| Connectors | 1 |
| Leakage current detection | Oui - 6mA |
|---|---|
| Power supply | Single phase |
| Indicator | LEDs |
|---|---|
| Communication module | Wifi |
| Access | Plug & Play |
| Protection | IP54 - withstands rain |
|---|---|
| Impact resistance | IK10 - excellent impact resistance |
| Operating temperature | -25 ° C to + 50 ° C, humidity 95% max |
| Mounting | Intérieur & Extérieur |
|---|
Notices & Documents
A question to help you choose your charging station?
Contact our specialists, available Monday to Friday from 9:00 to 18:00.
Have your charging station installed
At home or at work, a certified installer will install your charging station.
Learn moreCustomers who bought this product also bought...
Customer reviews
check_circle
check_circle
Something went wrong
Filters