KEBA Charging station P30 125031 a-series - 2.3 to 22kW - Plug & charge and RFID
KEBA
Securedpayment
14 Daysreturn policy
Delivery in48h
Pack content
Description
Plug & Charge and RFID charging station KEBA with adjustable power ideal for the company
This charging station Keba A 120281 is a new version of the Keba b 98137 and 98136
The charging station Keba P30 KeContact series-A - 125031 - Green edition - connects single-phase or three-phase , a adjustable intensity between 10A and 32A . It can therefore accommodate the available power of your business or home. Its front lockable plug Type 2S socket will ensure a safe charging of your electric car mode 3.
The power load is adjustable between 2.3 and 22 kW, with Dipswitches buttons inside the charging station, editable easily.
The wide adjustable power of Keba charging station b makes it a very versatile charging station that will fit both a house, a garage or a parking of a company.
The function " Auto Recovery " allows, in case of power failure, overheating or failure of the RCD, to take charge as soon as the power is restored.
This charging station in Plug & Play and RFID : just plug the cable and charging starts automatically. You can parameter the station to work only with RFID cards.
Free access mode or RFID card
The charging station can be configured in free access mode or access by RFID card, and you can easily switch from one mode to the other. A manual is provided for this. If RFID card access mode is configured, simply swipe the master card in front of the reader, then swipe any other RFID card or badge, before swiping the master card again. The new card will then be encoded and will enable charging.
There is no wifi or bluetooth connectivity.
Charging
Up to 100km more runtime per charge time (if charging to 22kW).
Key Features
- Activation: (Plug and Play) or RFID card reader (switchable)
- Setting the charging current to 10A, 13A, 16A, 20A, 24A or 32A
- Possible single-phase or three-phase connection
- CC leakage current detection
- Overcurrent detection
- IP54 and IK08: resists rain and shocks
- Plug: Type 2S. Socket with safety shutter
- Wall mounting kit included
Options
- Charging station stand for one charging station
- Charging station for two charging stations
- Triangle charging station stand for two charging stations
Circuit Protection
The following electrical protection are required and are installed on a dedicated line, with cable section 2,5mm² is 20A circuit breaker, and 10mm² if 40A circuit breaker. They were approved by electricians , and respect the current French regulations:
- Type A differential switch 40A 30mA (type B is not required for KEBA) (eg HAGER BDH440F) - not included
- Circuit breaker 16A to 40A Curve C (depending on the setting of the charging station) (eg HAGER NGT840 40A) - not included
- Shunt trip 230 / 415V (required for the ZE Ready) (eg, HAGER MZ203 ) - not included
User Interface
- charging station to open access Plug & amp; Play: you plug and charging starts automatically
- LED Headband indicating charge status and LCD display indicating power consumption
- RJ45 Ethernet interface to connect with a PC: Technical parameter setting and adding / removing RFID cards
- USB interface for firmware updates
Data sheet
|
Brand's reference
|
|
| Brand | KEBA |
| Reference | Keba-125031 |
|
Compatibility
|
|
| Vehicle compatibility | Compatible with all electric cars |
| Compatibility 1 PHASE 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Citoën e-Jumpy, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot e-Partner,Renault Twizy, Skoda Citigo e iV, Volkswagen e-Up, Bolloré Bluesummer |
| Compatibility 1 PHASE 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi R8 e-tron, BMW iX3, Citoën ë-C4, Fiat 500e, Hyundai Ioniq, Hyundai Kona, Honda-e, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, Lexus UX 300e, Mazda MX-30, Mercedes e-Vito, Mercedes e-Sprinter, Nissan Leaf 2018, Nissan E-NV200, Opel Ampera , Opel Mokka-e, Peugeot e-2008, Renault Master Z.E, Renault Kangoo Z.E, Smart ForFour EQ, Skoda Citigo e iV, Volkswagen e-Golf, Volkswagen I.D 3 |
| Compatibility 3 PHASES 16A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 16A: BMW I3 94Ah, BMW I3 120Ah, Citroën ë-C4, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, DS DS3 Crossback e-Tense, Fiat 500e, Ford Mustang Mach-E, Mercedes EQA, Mercedes EQB, Mercedes EQC, Mercedes EQS, Mini Cooper SE, Opel Corsa-e, Skoda Enyaq, Polestar 2, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen ID.3, Volkswagen ID.4, Volvo XC40 |
| Compatibility 3 PHASES 32A | Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Porsche Taycan, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X |
|
Physical specifications
|
|
| Color | White black |
| Dimensions | L240 x H495 x P163 mm |
| Weight | 4.8 kg |
| Material | Plastic |
| Charge socket | Type 2S |
| Connectors | 1 |
| Attached cable | No |
| Shutter | Yes |
|
Electrical specifications
|
|
| Charge power | From 2.3 to 22 kW - Adjustable, 2.3 to 7.4 kW - Adjustable |
| Voltage | 230V to 400V - Adjustable |
| Charge current | Configurable en 10A, 13A, 16A, 20A, 25A ou 32A, Configurable 10A, 13A, 16A, 24A or 32A |
| Mode of loading | mode 3 |
| Leakage current detection | Yes |
| Energy meter | No |
| Power supply | Single phase, Three phase |
|
Communication & Access
|
|
| Indicator | LED Headband three color LCD |
| Communication module | RJ45 Ethernet, USB |
| Communication protocol | No, autostart |
| Access | RFID card, Plug & Play |
|
Protections and Temperatures
|
|
| Protection | IP54 - withstands rain |
| Impact resistance | IK08 - High impact resistance |
| Operating temperature | -25 ° C to + 40 ° C, humidity 95% max |
|
Installation
|
|
| Mounting | Wall mounting (kit supplied) or post (optional) |
| Installation | wall, On stand |
| Wiring | 10 mm² - In accordance with the regulations and standards |
|
Certifications
|
|
| Standards and guidelines | Guidelines and certifications: EC, 2004/108 / EC, 2006/95 / EC, 1999/5 / EC R & TTE Directive, 2011/65 / EU | Standards: EN 61851-1, EN 61851-22, EN 62196-1, EN 62196-2, EN 61439-1, EN 61439-7 E DIN, EN 61000-6-1, EN 61000-6-3, EN 50581 : 2012 (RoHS-RL) R |
| ZE ready | Yes |
|
Guarantee
|
|
| Guarantee | 2 years |
|
autres caractéristiques
|
|
| Prime Advenir | borne compatible avec le programme Advenir |
Compatible products recommendation
We can help you to choose the best charging station
- Expert advice
- Lowest Prices
- Multi-brand choice
We have the trust of our customers!
Need help? Contact our technical support.
We are available from Monday to Friday from 9:00 to 18:00