Alfen Pro Line charging station is ideal for an indoor or outdoor company parking lot or homes. This Alfen Pro Line will allow you to take full advantage of your electric vehicle thanks to a simple, reliable and fast mode 3 (IEC61851) charging system.
The charging power is adjustable between 6A and 32A in single phase or three phase, which allows to adapt the station to the available power of the installation.
Alfen can be installed with type A protections in the electrical panel which will protect the station against overheating, short-circuits and insulation defects. The charging station also integrates a DC leakage current detector.
Compatible with all models of electric cars or rechargeable hybrids, the Alfen Pro Line charging station is recommended for companies and private homes.
Your charging station is in Plug & Play mode. Once a car is connected, the charging starts automatically. More information about the free access charging stations.
Your charging station is always locked and charging is permitted only when passing a valid RFID card on the reader of the charging station. If you buy the Carplug RFID cards with the charging station, they will already be set and will activate your charging station. It is also possible to add yourself any RFID card thereafter. More information on RFID access cards .
The charging station can be connected in single or three-phase and the charging power can be adjusted between 6A and 32A. Charging process is done in mode 3 via a type 2 charging cable (Alfen side). Maximum power in single phase 7,4kW and in three phase 22kW
Alfen Pro Line is one of the most efficient charging stations on the market. Discreet, light and practical. It is also robust (IK10) and resistant to heavy rain (IP55). It can be installed outside without protection against rain on a wall or on an Alfen support (ideal for company parking lots).
ALFEN is a Dutch company listed on the Amsterdam stock exchange, which manufactures charging stations since 2011. The brand has become internationally recognized for its charging stations, which are synonymous with robustness, reliability and ease of use .
The Carplug team has successfully tested the Alfen Pro Line charging station. The connection of the power supply is easy thanks to the 10mm² charging station cable. A small screwdriver is needed to make the cable connection.
The charging station turns on quickly and is ready to charge in about 30 seconds. We then connected the cable: the recharge started by itself at 32A. To change the power, we had to install on our laptop the ICU Server Installer software and connect to the charging station via its Ethernet port. Assessment: Very positive. Ideal charging station for a company parking lots or a house.
Carplug offers a wide range of wallboxes to private individuals within this range. The charging stations proposed in this section are models perfectly adapted to a domestic use. You will find products with different capacities, able to support and distribute several powers: 7W wallbox and 22kW wallbox mainly. For a private, domestic use, each wallbox for electric car is fully secured. Check the power supported by your vehicle and the capacity of your meter in order to select the single or three-phase wallbox that suits you. A three-phase wallbox will be able to handle more voltage and deliver more power. Depending on your electrical consumption and your home, a single-phase wallbox may be sufficient for your needs or a three-phase model may be more suitable. Sockets and protection solutions to avoid the dangers of overloading a home are also available. Find all the characteristics in the product sheets. If you have any doubts, Carplug professionals are at your disposal to advise you and guide you among these wallboxes towards the model that will perfectly meet your expectations.
|Detailed title||ALFEN charging station 904460034 Eve Mini - Type 2 - 3.7 to 22kW 16 / 32A - Adjustable - 2G, RFID|
|Vehicle compatibility||Compatible with all electric cars|
|Compatibility 1 PHASE 16A||Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Citoën e-Jumpy, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot e-Partner,Renault Twizy, Skoda Citigo e iV, Volkswagen e-Up, Bolloré Bluesummer|
|Compatibility 1 PHASE 32A||Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi R8 e-tron, BMW iX3, Citoën ë-C4, Fiat 500e, Hyundai Ioniq, Hyundai Kona, Honda-e, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, Lexus UX 300e, Mazda MX-30, Mercedes e-Vito, Mercedes e-Sprinter, Nissan Leaf 2018, Nissan E-NV200, Opel Ampera , Opel Mokka-e, Peugeot e-2008, Renault Master Z.E, Renault Kangoo Z.E, Smart ForFour EQ, Skoda Citigo e iV, Volkswagen e-Golf, Volkswagen I.D 3|
|Compatibility 3 PHASES 16A||Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 16A: BMW I3 94Ah, BMW I3 120Ah, Citroën ë-C4, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, DS DS3 Crossback e-Tense, Fiat 500e, Ford Mustang Mach-E, Mercedes EQA, Mercedes EQB, Mercedes EQC, Mercedes EQS, Mini Cooper SE, Opel Corsa-e, Skoda Enyaq, Polestar 2, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen ID.3, Volkswagen ID.4, Volvo XC40|
|Compatibility 3 PHASES 32A||Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Porsche Taycan, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X|
|Color||Traffic white (RAL 9016)|
|Dimensions||L240 x H370 x P130 mm|
|Charge socket||Type 2|
|Charge power||From 2.3 to 22 kW - Adjustable|
|Voltage||230V to 400V - Adjustable|
|Charge current||Configurable between 10A and 32A|
|Mode of loading||mode 3|
|Leakage current detection||Yes|
|Integrated circuit breaker||Integrated circuit breaker 40A|
|Energy meter||integrated and certified KWh Meter MID|
|Power supply||Three phase|
Communication & Access
|Indicator||LED Headband three color LCD|
|Communication module||3G, Ethernet RJ45|
|Access||RFID card, Plug & Play, Paying|
Protections and Temperatures
|Protection||IP54 - withstands rain|
|Impact resistance||IK10 - excellent impact resistance|
|Operating temperature||-25 ° C to + 40 ° C, humidity 95% max|
|Mounting||Wall mounting (kit supplied) or post (optional)|
|Installation||wall, On stand|
|Wiring||10 mm² - In accordance with the regulations and standards|
|Standards and guidelines||Guidelines and certifications: CE, The provisions of the low voltage directive 2014/35 / EU, The provisions of the EMC guideline 2014/30 / EU, IEC 61851-1 (2010) - Electric vehicle conductive charging system, General requirements NEN-EN -IEC 61851-1: 2011|
|Package content||1 charging station + 1 wall mounting kit + 1 + 2 user guide RFID cards|
Need assistance to choose your charging station or cable?
Need an advice on our products?
Contact our experts, available from Monday to Friday from 9 AM to 6 PM
+33 3 67 10 41 41
Datas sheets :
We can help you to choose the best charging station
We have the trust of our customers!
Need help? Contact our technical support.
We are available from Monday to Friday from 9:00 to 18:00